Motar Girgiza Mai Faɗi 8mm - Kauri 2.7mm | LEADER FPCB-0827

Takaitaccen Bayani:

A halin yanzu Leader Micro Electronics yana samar da injinan girgiza tsabar kuɗi mai girman 8mm, wanda aka fi sani da injinan girgiza pancake tare da diamita na φ7mm-φ12mm.

Injinan tsabar kuɗi suna da sauƙin amfani kuma ana iya makala su a wurinsu tare da tsarin ɗaurawa mai ƙarfi na dindindin.

Muna bayar da nau'ikan waya mai amfani da lead, FPCB, da kuma nau'ikan da za a iya hawa su a lokacin bazara don injinan tsabar kuɗi. Ana iya gyara tsawon wayar kuma ana iya ƙara mahaɗin kamar yadda ake buƙata.

Aika mana imel Zazzage Takardar Bayanai

Cikakken Bayani game da Samfurin

Bayanin kamfani

Alamun Samfura

Babban Sifofi

- Nisan diamita: φ7mm - φ12mm

- Ƙarancin Kudin Ma'aikata

- Ƙarancin Hayaniya

- Faɗin Samfura

Ƙayyadewa

Ana amfani da injin girgiza mai faɗi 8mm don samar da aikin girgiza don biyan buƙatun na'urori masu siriri da ɗaukar hoto. Yana ba da ingantaccen aiki, ƙarfi mai ƙarfi da tsawon rai na sabis. Lokacin da ka karɓi saƙon rubutu ko kira a wayarka, injin yana fara juyawa mai sauri, yana kunna aikin girgiza a wayarka.

Nau'in Fasaha:	Goge
Diamita (mm):	8.0
Kauri (mm):	2.7
Ƙarfin Wutar Lantarki Mai Ƙimar (Vdc):	3.0
Wutar Lantarki Mai Aiki (Vdc):	2.7~3.3
An ƙima MAX (mA) na Yanzu:	80
FarawaNa yanzu (mA):	120
Saurin da aka ƙima (rpm, MIN):	10000
Ƙarfin Girgiza (Grms):	0.6
Sashen Marufi:	Tire na filastik
Adadin kowace tayal / tire:	100
Adadi - Babban akwati:	8000

Zane-zanen injiniya na injin girgiza tsabar kuɗi na 8mm

Aikace-aikace

Motar tsabar kuɗi tana da samfura da yawa da za a zaɓa kuma tana da matuƙar amfani saboda yawan samarwa ta atomatik da ƙarancin kuɗin aiki. Saboda ƙaramin girmanta da kuma tsarin girgiza da aka haɗa, injin girgiza mai faɗi 8mm zaɓi ne mai shahara ga aikace-aikace daban-daban. Manyan aikace-aikacen injin girgiza tsabar kuɗi sune wayoyin hannu, agogon hannu, na'urorin kunne na bluetooth, na'urorin kyau, kayan wasa, kula da lafiya, na'urar likita, na'urorin lantarki da sauransu. Ana amfani da su akai-akai don samar wa mai amfani da faɗakarwa, faɗakarwa ko ra'ayoyin haptic.

Kalmomi Masu Mahimmanci

Ƙaramin injin girgiza, injin haptic, injin girgiza tsabar kuɗi na micro 8mm, injin girgiza ƙananan, injin girgiza ƙananan dc, injin girgiza ƙananan dc, injin 3v, ƙaramin injin dc, injin girgiza ƙananan 8mm.

Samfuran Ci gaba:

Za mu iya samar da samfuran guda 10 kyauta, kawai kuna buƙatar ɗaukar nauyin jigilar kaya.

Injiniyanci da Masana'antu:

Da fatan za a tuntuɓi injiniyoyin tallace-tallace don neman ƙimar samarwa da kuma shawarwarin sabis na keɓancewa.

Yin Aiki Da Mu

Aika Tambaya & Zane-zane

Don Allah a gaya mana irin injin da kake sha'awar, sannan a ba da shawara kan girmansa, ƙarfinsa, da kuma yawansa.

Sharhin Bita & Magani

Za mu samar muku da cikakken bayani game da buƙatunku cikin awanni 24.

Yin Samfura

Bayan mun tabbatar da dukkan bayanan, za mu fara yin samfurin kuma mu shirya shi cikin kwana 2-3.

Samar da Kayan Abinci Mai Yawa

Muna kula da tsarin samarwa da kyau, muna tabbatar da cewa an sarrafa kowane fanni da ƙwarewa. Mun yi alƙawarin inganci mai kyau da kuma isar da kaya akan lokaci.

Tambayoyi da Amsoshi Don Tsabar Tsabar Girgiza Motar

Menene girman injin girgiza tsabar kuɗi na FPCB-0827?

- Girman su ne diamita 8mm da kauri 2.7mm.

Menene alkiblar juyawar wannan injin nau'in tsabar kuɗi?

- CW (agogo) ko CCW (akasin agogo)

Menene kewayon zafin aiki na wannan injin girgizar micro?

- Yanayin zafin aiki shine -20~+60℃.

Har yanzu ba a sami Injin Girgiza Mai Faɗi na 8mm mai kyau ba?

Idan kuna da wasu tambayoyi game da injinan micro DC, ƙayyadaddun bayanai, takaddun bayanai ko ambato, da fatan za ku iya tuntuɓar mu.
Idan kuna buƙatar haɗin waya na musamman don injin girgizar ku, kamar madadin tsayin jagora tare da masu haɗawa (misali Molex, JST) da tsayin tsiri, kawai ku tuntuɓe muleader@leader-cn.cnkuma raba takamaiman buƙatunku.

Na baya: Dia 8mm*2.0mm | Tsabar Motar Girgiza 8mm | LEADER FPCB-0820

Na gaba: Motar Girgiza Tsabar ...

Sarrafa Inganci

Muna daDuba 200% kafin jigilar kayakuma kamfanin yana aiwatar da hanyoyin sarrafa inganci, rahoton SPC, da rahoton 8D ga samfuran da suka lalace. Kamfaninmu yana da tsauraran tsarin kula da inganci, wanda galibi yana gwada abubuwa guda huɗu kamar haka:

01. Gwajin Aiki; 02. Gwajin Tsarin Raƙuman Ruwa; 03. Gwajin Hayaniya; 04. Gwajin Bayyanar Kamanni.

Bayanin Kamfani

An kafa a cikin2007Kamfanin Leader Micro Electronics (Huizhou) Co., Ltd. kamfani ne mai fasaha mai zurfi wanda ya haɗa da bincike da haɓaka, samarwa, da tallace-tallace na injinan girgiza ƙananan na'urori. Leader galibi yana ƙera injinan tsabar kuɗi, injinan layi, injinan goge-goge da injinan silinda, wanda ya mamaye yanki sama da 100 na masana'antu.murabba'i 20,000mita. Kuma ƙarfin ƙananan injina na shekara-shekara kusan kusan nemiliyan 80Tun lokacin da aka kafa ta, Leader ya sayar da kusan injinan girgiza biliyan ɗaya a duk faɗin duniya, waɗanda ake amfani da su sosai a kusanNau'ikan samfura 100a fannoni daban-daban. Manyan aikace-aikacen sun ƙarewayoyin komai da ruwanka, na'urorin da za a iya sawa, sigari na lantarkida sauransu.

Gwajin Aminci

Leader Micro yana da dakunan gwaje-gwaje na ƙwararru tare da cikakken kayan aikin gwaji. Manyan injunan gwajin aminci sune kamar haka:

01. Gwajin Rayuwa; 02. Gwajin Zafi & Danshi; 03. Gwajin Girgizawa; 04. Gwajin Juya Na'ura; 05. Gwajin Fesa Gishiri; 06. Gwajin Sufuri na Kwaikwayo.

Marufi & Jigilar Kaya

Muna tallafawa jigilar jiragen sama, jigilar kaya ta teku da kuma jigilar kaya ta gaggawa. Manyan jigilar kaya sune DHL, FedEx, UPS, EMS, TNT da sauransu. Don marufi:Injinan guda 100 a cikin tiren filastik >> Tiren filastik guda 10 a cikin jakar injin tsabtace gida >> Jakunkunan injin tsabtace gida guda 10 a cikin kwali.

Bugu da ƙari, za mu iya samar da samfurori kyauta idan an buƙata.