Dia 8mm*3.0mm Ƙaramin Motar Girgiza Tsabar Kuɗi| Ƙaramin Mota | LCM-0830

Takaitaccen Bayani:

LCM0830 injin girgiza tsabar kuɗi ne mai kama da goga, diamita na 8mm da kauri na 3.0mm. Yana ba da zaɓuɓɓukan hulɗa iri-iri, gami da nau'in waya, nau'in mahaɗi, nau'in FPC da nau'in bazara don biyan buƙatunku na musamman.
Wannan injin girgiza ya dace da aikace-aikace iri-iri da ke buƙatar aikin ƙararrawa na girgiza. Ana iya keɓance shi da tsayin gubar da haɗin kai daban-daban.

Aika mana imel Zazzage Takardar Bayanai

Cikakken Bayani game da Samfurin

Bayanin kamfani

Alamun Samfura

Babban Sifofi

- Nisan diamita: φ7mm - φ12mm

- Ƙarancin Kudin Ma'aikata

- Ƙarancin Hayaniya

- Faɗin Samfura

Ƙayyadewa

Nau'in Fasaha:	Goge
Diamita (mm):	8.0
Kauri (mm):	3.0
Ƙarfin Wutar Lantarki Mai Ƙimar (Vdc):	3.0
Wutar Lantarki Mai Aiki (Vdc):	2.7~3.3
An ƙima MAX (mA) na Yanzu:	80
FarawaNa yanzu (mA):	120
Saurin da aka ƙima (rpm, MIN):	10000
Ƙarfin Girgiza (Grms):	0.6
Sashen Marufi:	Tire na filastik
Adadin kowace tayal / tire:	100
Adadi - Babban akwati:	8000

ƙaramin injin girgiza zane-zanen injiniya

Aikace-aikace

Injin tsabar kuɗi yana da samfura da yawa da za a zaɓa kuma yana da matuƙar tattalin arziki saboda yawan samarwa ta atomatik da ƙarancin kuɗin aiki. Manyan aikace-aikacen injin girgiza tsabar kuɗi sune wayoyin hannu, agogon hannu, na'urorin kunne na bluetooth da na'urorin kwalliya.

Yin Aiki Da Mu

Aika Tambaya & Zane-zane

Don Allah a gaya mana irin injin da kake sha'awar, sannan a ba da shawara kan girmansa, ƙarfinsa, da kuma yawansa.

Sharhin Bita & Magani

Za mu samar muku da cikakken bayani game da buƙatunku cikin awanni 24.

Yin Samfura

Bayan mun tabbatar da dukkan bayanan, za mu fara yin samfurin kuma mu shirya shi cikin kwana 2-3.

Samar da Kayan Abinci Mai Yawa

Muna kula da tsarin samarwa da kyau, muna tabbatar da cewa an sarrafa kowane fanni da ƙwarewa. Mun yi alƙawarin inganci mai kyau da kuma isar da kaya akan lokaci.

Tambayoyi da Amsoshi Don Tsabar Tsabar Girgiza Motar

Menene girman injin girgiza micro LCM0830?

- Girman su ne diamita 8mm da kauri 3.0mm.

Wane irin mahaɗi ne injin girgiza na LCM0830 ke amfani da shi?

Motar girgiza ta LCM0830 yawanci tana zuwa da mahaɗin solder pad.

Menene matsakaicin hanzarin da injin girgiza na LCM0830 zai iya samarwa?

Matsakaicin hanzarin ya dogara ne akan abubuwa daban-daban kamar ƙarfin lantarki da mita, amma yawanci yana tsakanin 0.6g zuwa 0.8g.

Na baya: Dia 8*2.7mm 3v Wayar Salula Tsabar Girgiza Mai Faɗi Mini | LEADER LCM-0827

Na gaba: Dia 8mm*3.4mm Ƙaramin Motar Girgizawa| Motar Dc | LEADER LCM-0834

Sarrafa Inganci

Muna daDuba 200% kafin jigilar kayakuma kamfanin yana aiwatar da hanyoyin sarrafa inganci, rahoton SPC, da rahoton 8D ga samfuran da suka lalace. Kamfaninmu yana da tsauraran tsarin kula da inganci, wanda galibi yana gwada abubuwa guda huɗu kamar haka:

01. Gwajin Aiki; 02. Gwajin Tsarin Raƙuman Ruwa; 03. Gwajin Hayaniya; 04. Gwajin Bayyanar Kamanni.

Bayanin Kamfani

An kafa a cikin2007Kamfanin Leader Micro Electronics (Huizhou) Co., Ltd. kamfani ne mai fasaha mai zurfi wanda ya haɗa da bincike da haɓaka, samarwa, da tallace-tallace na injinan girgiza ƙananan na'urori. Leader galibi yana ƙera injinan tsabar kuɗi, injinan layi, injinan goge-goge da injinan silinda, wanda ya mamaye yanki sama da 100 na masana'antu.murabba'i 20,000mita. Kuma ƙarfin ƙananan injina na shekara-shekara kusan kusan nemiliyan 80Tun lokacin da aka kafa ta, Leader ya sayar da kusan injinan girgiza biliyan ɗaya a duk faɗin duniya, waɗanda ake amfani da su sosai a kusanNau'ikan samfura 100a fannoni daban-daban. Manyan aikace-aikacen sun ƙarewayoyin komai da ruwanka, na'urorin da za a iya sawa, sigari na lantarkida sauransu.

Gwajin Aminci

Leader Micro yana da dakunan gwaje-gwaje na ƙwararru tare da cikakken kayan aikin gwaji. Manyan injunan gwajin aminci sune kamar haka:

01. Gwajin Rayuwa; 02. Gwajin Zafi & Danshi; 03. Gwajin Girgizawa; 04. Gwajin Juya Na'ura; 05. Gwajin Fesa Gishiri; 06. Gwajin Sufuri na Kwaikwayo.

Marufi & Jigilar Kaya

Muna tallafawa jigilar jiragen sama, jigilar kaya ta teku da kuma jigilar kaya ta gaggawa. Manyan jigilar kaya sune DHL, FedEx, UPS, EMS, TNT da sauransu. Don marufi:Injinan guda 100 a cikin tiren filastik >> Tiren filastik guda 10 a cikin jakar injin tsabtace gida >> Jakunkunan injin tsabtace gida guda 10 a cikin kwali.

Bugu da ƙari, za mu iya samar da samfurori kyauta idan an buƙata.