Injin Goga na Dia 10mm*3.0mm Dc | Injin Lantarki | LEADER LCM-1030

Takaitaccen Bayani:

A halin yanzu Leader Micro Electronics yana samar da injinan girgiza tsabar kuɗi mai girman mm 10, wanda aka fi sani da injinan girgiza pancake tare da diamita na φ7mm-φ12mm.

Injinan tsabar kuɗi suna da sauƙin amfani kuma ana iya makala su a wurinsu tare da tsarin ɗaurawa mai ƙarfi na dindindin.

Muna bayar da nau'ikan waya mai amfani da lead, FPCB, da kuma nau'ikan da za a iya hawa su a lokacin bazara don injinan tsabar kuɗi. Ana iya gyara tsawon wayar kuma ana iya ƙara mahaɗin kamar yadda ake buƙata.

Aika mana imel Zazzage Takardar Bayanai

Cikakken Bayani game da Samfurin

Bayanin kamfani

Alamun Samfura

Babban Sifofi

- Nisan diamita: φ7mm - φ12mm

- Ƙarancin Kudin Ma'aikata

- Faɗin Samfura

Ƙayyadewa

Nau'in Fasaha:	Goge
Diamita (mm):	10
Kauri (mm):	3.0
Ƙarfin Wutar Lantarki Mai Ƙimar (Vdc):	3.0
Wutar Lantarki Mai Aiki (Vdc):	2.7~3.3
An ƙima MAX (mA) na Yanzu:	80
FarawaNa yanzu (mA):	120
Saurin da aka ƙima (rpm, MIN):	10000
Ƙarfin Girgiza (Grms):	1.0
Sashen Marufi:	Tire na filastik
Adadin kowace tayal / tire:	100
Adadi - Babban akwati:	8000

goga na lantarki dc motar zane-zanen injiniya

Aikace-aikace

Injin tsabar kuɗi yana da samfura da yawa da za a zaɓa kuma yana da matuƙar tattalin arziki saboda yawan samarwa ta atomatik da ƙarancin kuɗin aiki. Manyan aikace-aikacen injin girgiza tsabar kuɗi sune wayoyin hannu, agogon hannu, na'urorin kunne na bluetooth da na'urorin kwalliya.

Yin Aiki Da Mu

Aika Tambaya & Zane-zane

Don Allah a gaya mana irin injin da kake sha'awar, sannan a ba da shawara kan girmansa, ƙarfinsa, da kuma yawansa.

Sharhin Bita & Maganin

Za mu samar muku da cikakken bayani game da buƙatunku cikin awanni 24.

Yin Samfura

Bayan mun tabbatar da dukkan bayanan, za mu fara yin samfurin kuma mu shirya shi cikin kwana 2-3.

Samar da Kayan Abinci Mai Yawa

Muna kula da tsarin samarwa da kyau, muna tabbatar da cewa an sarrafa kowane fanni da ƙwarewa. Mun yi alƙawarin inganci mai kyau da kuma isar da kaya akan lokaci.

Tambayoyi da Amsoshi Don Tsabar Tsabar Girgiza Motar

Menene girman injin girgiza micro LCM1030?

- Girman su diamita ne 10mm da kauri 3.0mm.

Menene alkiblar juyawar injin nau'in tsabar kuɗi?

- CW (agogo) ko CCW (akasin agogo)

Menene matsakaicin hanzarin da injin girgiza na LCM1030 zai iya samarwa?

Matsakaicin hanzarin ya dogara ne akan abubuwa daban-daban kamar ƙarfin lantarki da mita, amma yawanci yana tsakanin 1.0g zuwa 1.2g.

Na baya: Injin Girgiza Tsabar ...

Na gaba: Dia 10mm*3.4mm Nau'in Tsabar Mota Mai Girgizawa | LEADER LCM-1034

Sarrafa Inganci

Muna daDuba 200% kafin jigilar kayakuma kamfanin yana aiwatar da hanyoyin sarrafa inganci, rahoton SPC, da rahoton 8D ga samfuran da suka lalace. Kamfaninmu yana da tsauraran tsarin kula da inganci, wanda galibi yana gwada abubuwa guda huɗu kamar haka:

01. Gwajin Aiki; 02. Gwajin Tsarin Raƙuman Ruwa; 03. Gwajin Hayaniya; 04. Gwajin Bayyanar Kamanni.

Bayanin Kamfani

An kafa a cikin2007Kamfanin Leader Micro Electronics (Huizhou) Co., Ltd. kamfani ne mai fasaha mai zurfi wanda ya haɗa da bincike da haɓaka, samarwa, da tallace-tallace na injinan girgiza ƙananan na'urori. Leader galibi yana ƙera injinan tsabar kuɗi, injinan layi, injinan goge-goge da injinan silinda, wanda ya mamaye yanki sama da 100 na masana'antu.murabba'i 20,000mita. Kuma ƙarfin ƙananan injina na shekara-shekara kusan kusan nemiliyan 80Tun lokacin da aka kafa ta, Leader ya sayar da kusan injinan girgiza biliyan ɗaya a duk faɗin duniya, waɗanda ake amfani da su sosai a kusanNau'ikan samfura 100a fannoni daban-daban. Manyan aikace-aikacen sun ƙarewayoyin komai da ruwanka, na'urorin da za a iya sawa, sigari na lantarkida sauransu.

Gwajin Aminci

Leader Micro yana da dakunan gwaje-gwaje na ƙwararru tare da cikakken kayan aikin gwaji. Manyan injunan gwajin aminci sune kamar haka:

01. Gwajin Rayuwa; 02. Gwajin Zafi & Danshi; 03. Gwajin Girgizawa; 04. Gwajin Juya Na'ura; 05. Gwajin Fesa Gishiri; 06. Gwajin Sufuri na Kwaikwayo.

Marufi & Jigilar Kaya

Muna tallafawa jigilar jiragen sama, jigilar kaya ta teku da kuma jigilar kaya ta gaggawa. Manyan jigilar kaya sune DHL, FedEx, UPS, EMS, TNT da sauransu. Don marufi:Injinan guda 100 a cikin tiren filastik >> Tiren filastik guda 10 a cikin jakar injin tsabtace gida >> Jakunkunan injin tsabtace gida guda 10 a cikin kwali.

Bugu da ƙari, za mu iya samar da samfurori kyauta idan an buƙata.