vibration motor manufacturers

Vibration Motors for Hair Growth Caps | LCM1020 & LBM1027

https://www.leader-w.com/vibration-motor-for-hair-growth-cap/

Hair-growth caps and other head-worn scalp-care devices may incorporate vibration as an additional tactile feature. LEADER offers two φ10 mm motor options for project evaluation: the LCM1020 coin vibration motor and the LBM1027 brushless vibration motor.

The two models differ in thickness, motor type, vibration force, operating voltage range, and specified cycle-life test mode. Device teams can compare these characteristics against the cap structure, power design, intended operating pattern, and target user experience.

Write your message here and send it to us

Vibration Motor Integration in Hair-Growth Cap Designs

A vibration motor can be evaluated as a component for adding tactile output to a hair-growth cap or head-worn scalp-care device. Its placement and mounting method depend on the cap structure, available space, lining materials, and the way vibration should be transmitted through the finished product.

The motor produces vibration, while the device’s control board and drive circuit determine when and how it operates. The perceived output may change after installation, so motor selection should be followed by evaluation in the intended cap structure.

Two Motor Options for Different Design Priorities

The LCM1020 and LBM1027 give device teams two options to compare. Their specifications support an initial review; final selection should be based on testing in the complete device.

LCM1020: A Thinner ERM Option

The LCM1020 is an ERM coin vibration motor with a φ10 × 2.0 mm profile. Its thinner form factor may suit designs where the available space within the cap lining is limited.

The supplied specification lists a minimum vibration force of 1.25G Peak, a rated voltage of 3.0V, and a rated current of up to 80mA. The cycle-life figure is specified under a test pattern of 1 second on and 2 seconds off.

LCM1020 developed by LEADER offers the following advantages:

 

1. Ultra-thin form factor for tight spaces

With a flat Φ10mm×2.0mm profile, the LCM1020 fits easily into the narrow lining layer of a hair-growth cap without compromising the cap’s silhouette or fit, leaving ample design room for symmetrical multi-motor layouts.

2. Low power and quiet operation—balancing experience and battery life

A suitable 1.25G vibration delivers clear, comfortable scalp massage feedback through the lining while running quietly. Its 3V/80mA low-current design matches the product’s lithium battery supply perfectly and adds no extra burden on battery life.

3. Wide temperature range and high reliability for shipping and mass production

It operates from -40°C to +80°C, withstanding cross-border transport and humid bathroom environments. Excellent performance consistency greatly reduces customers’ production-line integration difficulty and defect rate, ensuring stable quality under prolonged high-frequency use.

Technology Type: BRUSH
Diameter (mm): 10
Thickness (mm): 2.0
Rated Voltage (Vdc): 3.0
Operating Voltage (Vdc): 2.7~3.3
Rated Current MAX (mA): 80
Starting Current (mA): 120
Rated Speed (rpm, MIN): 10000
Vibration Force (Grms): 0.6
Part Packaging: Plastic Tray
Qty per reel / tray: 100
Quantity - Master box: 8000

 

LBM1027: A Brushless Option with Higher Specified Vibration Force

For extreme thinness and cost-effectiveness in standard models, the LCM1020 is the go-to choice. For flagship products that require a 3-year-plus warranty commitment, however, the brushless motor LBM1027 is recommended.

With its brushless architecture, the LBM1027 eliminates the carbon-brush wear of conventional brushed motors, delivering a longer service life that perfectly matches extended warranty periods. It also produces stronger, more stable vibration for superior physical relief during wear, greatly enhancing the user’s scalp massage and relaxation experience.

The LBM1027 is a BLDC vibration motor measuring φ10 × 2.7 mm. It is thicker than the LCM1020 and has a higher specified minimum vibration force of 2.0G Peak.

Its supplied cycle-life specification is 500,000 cycles under a test pattern of 2 seconds on and 1 second off. Because the two models use different cycle-life test patterns, the cycle counts should not be treated as a direct like-for-like comparison or as a warranty period for the finished device.

Technology Type: BRUSHLESS
Diameter (mm): 10
Thickness (mm): 2.7
Rated Voltage (Vdc): 3.0
Operating Voltage (Vdc): 2.7~3.3
Rated Current MAX (mA): 80
Starting Current (mA): 200
Rated Speed (rpm, MIN): 10000
Part Packaging: Plastic Tray
Qty per reel / tray: 100
Quantity - Master box: 8000

 

LCM1020 and LBM1027 Specifications

The table below summarizes the specifications provided for the two motor options. Cycle-life conditions are shown alongside the cycle counts because the test patterns differ.

Item

LCM1020

(Standard Model)

LBM1027

(High-End Flagship Model)

Motor Type

ERM

BLDC

Dimensions (mm)

Φ10*T2.0

Φ10*T2.7

Vibration Force (G)

1.25G Min (PEAK)

2.0G Min (PEAK)

Voltage Range (V)

2.7-3.3

2.5-3.8

Rated Voltage (V)

3.0

3.0

Current (mA)

≤80

≤80

Speed (RPM)

14500±3500

13500±3500

Life

100,000 Cycles

(1 Cycle:1sec on/2sec off )

500,000 Cycles

(1 Cycle:2sec on/1sec off )

The cycle-life figures are specified under different test patterns and should be assessed against the intended operating conditions of the finished device.

Design Considerations for Motor Integration

Selecting a motor for a head-worn product involves more than comparing its diameter and vibration-force value. The motor should be reviewed in relation to the cap construction, power system, and intended operating pattern.

Fit Within the Cap Structure

The motor diameter is φ10 mm for both models, while their thickness differs: 2.0 mm for the LCM1020 and 2.7 mm for the LBM1027. Review the available installation space, surrounding layers, mounting method, and contact structure to determine how each option fits the design.

Vibration Output After Installation

The specified vibration-force values are component data. The vibration perceived through the finished cap may vary with the mounting structure, lining materials, motor position, and number of motors used. Evaluate the selected configuration in a representative device assembly before setting performance expectations.

Power Supply and Drive Conditions

The LCM1020 has an operating voltage range of 2.7–3.3V, while the LBM1027 operates within 2.5–3.8V. Confirm that the device’s power supply and drive circuit meet the selected motor’s requirements under the intended operating conditions.

Operating Pattern and Cycle-Life Evaluation

The supplied cycle-life figures use different operating patterns for the two models. Compare those test conditions with the hair-growth cap’s actual use pattern, and validate the motor in the complete device before estimating service life or making warranty commitments.

Noise and User Comfort

Noise and comfort depend on the assembled product, including the cap materials, mounting method, and motor position. Evaluate these characteristics in the intended structure rather than relying on the motor type or component specifications alone.

From Motor Selection to Device Evaluation

LEADER can support the initial motor review by comparing the available specifications with the design requirements for a hair-growth cap or head-worn scalp-care device.

Define the Design Priorities

The LCM1020 and LBM1027 can be compared according to available thickness, target vibration output, supply voltage, operating pattern, and project requirements.

Review the Motor in the Intended Structure

Evaluate the selected motor within the cap or housing structure. Review fit, mounting, vibration transmission, noise, and power behavior in the assembled device.

Confirm the Production Configuration

Once the sample configuration has been evaluated, confirm the selected model and applicable specifications for the project’s production planning.

Frequently Asked Questions

Which LEADER motor is thinner for a hair-growth cap design?

The LCM1020 measures φ10 × 2.0 mm, while the LBM1027 measures φ10 × 2.7 mm. The LCM1020 is the thinner option based on the supplied dimensions.

Which model has the higher specified vibration force?

The supplied data lists the LCM1020 at 1.25G Min, Peak, and the LBM1027 at 2.0G Min, Peak. The output in a finished cap should be evaluated in the intended mounting structure.

Are the cycle-life figures directly comparable?

No. The LCM1020 figure is based on a 1-second-on/2-second-off cycle, while the LBM1027 figure is based on a 2-second-on/1-second-off cycle. Compare each test condition with the project’s intended operating pattern.

Do these motors themselves provide a hair-growth treatment effect?

These products are vibration motors. Any hair-growth or treatment claim would need to be supported by evidence for the complete device and its intended use; it should not be inferred from the motor specifications alone.

What information helps LEADER review a hair-growth cap motor project?

Useful project information includes the available motor space, power-supply conditions, intended operating pattern, cap structure, expected quantity, and any drawings or sample requirements.

Share your device structure and project requirements with LEADER to review the LCM1020 and LBM1027 motor options for your design.

Write your message here and send it to us

close open